All Member Forum

 View Only

Workshops during the ITE 2016 Annual Meeting & Exhibit, Wednesday, August 17, 1:00 – 5:00 p.m

By Tatiana Richey posted 08-11-2016 12:07 PM

  

Add a workshop to your registration for the ITE 2016 Annual Meeting & Exhibit or register for one
separately. Registration for the ITE Annual Meeting & Exhibit is not required to attend these
workshops. Plus! Each workshop provides attendees with 4.0 PDH credits.

Connected Vehicle Deployment Resources
Professional Development Credits: 4.0 PDH (PTOE)
Developed in collaboration with the ITS Joint Program Office
This workshop sponsored by USDOT focuses on the portfolio of the free resources available to help practitioners
deploy to connected vehicle technology. This session will cover vehicle-to-infrastructure (V2I) guidance, training,
technical support, test bed affiliation, connected vehicle pilots, open data, and standards.
Facilitator(s):
Cory Krause, Senior Transportation Analyst, Noblis, Washington, DC
Cheryl Lowrance, Principal ITS Engineer, Noblis, Washington, DC
Registration Fee: $50 ITE Member/Non-Member

Tools and Techniques to Support Vision Zero – Data Driven Safety Analysis
Professional Development Credits: 4.0 PDH (PTOE / PTP)
Developed in collaboration with the Federal Highway Administration Office of Safety
This workshop will present a suite of tools and resources to assist transportation professionals to perform safety
evaluations of various parts of the right of way and all modes of transportation.
Facilitator:
John McFadden, Safety Engineer, Office of Technical Services, Federal Highway Administration,
Baltimore, MD
Registration Fee: $50 ITE Member/Non-Member

Designing Transit Streets: Places to Be, Places to Go
Professional Development Credits: 4.0 PDH/CM (PTOE / PTP / AICP)
Developed by the Complete Streets Council in collaboration with the National Association of
City Transportation Officials (NACTO)
The NACTO Transit Street Design Guide brings 21st-century street design together with best
practices in transit operations and network planning. The Transit Standing Committee of the
ITE Complete Streets Council is developing an application supplement. This workshop
features technical considerations and implementation case studies from these supplements
and offer opportunities for Q&A with the panelists as well as hands-on breakout exercises.
Facilitators:
Matthew Roe, Director, Designing Cities Initiative, National Association of City Transportation Officials
(NACTO), New York, NY
Brian Welch, Senior Manager, Planning Technical Services, Denver Regional Transportation District,
Denver, CO
Lawrence Marcus, Bureau Chief, Transportation Engineering & Operations, Arlington County, Arlington, VA
Registration Fee: $150 ITE Members; $250 for Non-Members

Implementing the New 6th Edition of the Highway Capacity Manual (HCM 6)
Professional Development Credits: 4.0 PDH (PTOE)
Developed in collaboration with the Transportation Research Board
The Transportation Research Board is working with ITE and the SimCap Standing Committee of the Traffic
Engineering Council on outreach activities associated with the summer release of the Highway Capacity
Manual 6th Edition (HCM 6). This workshop will present methods from HCM 6 and why these techniques are
relevant to today's problems. The session will cover implementing the HCM 6 in various settings, such as
reliability, freeways and interrupted flow facilities.
Facilitator:
Jess Billmeyer, Project Manager, AECOM, Madison, WI
Speakers:
Bastian Schroeder, Principal Engineer, Kittelson and Associates, Inc., Wilmington, NC
Dave Stanek, Associate, Fehr and Peers Transportation Consultant, Sacramento, CA
Lee Rodegerdts, Principal Engineer, Kittelson and Associates, Inc., Portland, OR
Aaron Elias, Senior Engineer, Kittelson and Associates, Inc., Oakland, CA
Scott Washburn, Professor, University of Florida, Gainesville, FL
Registration Fee: $150 ITE Members; $250 for Non-Members

0 comments
365 views

Permalink